INSTALLATION STEPS

Installation Steps

Combined with our installation video and our cable installation guide or mat installation guide, follow the following steps when installing a True Comfort floor heating system.

STEP 1

  • Determine the location of the thermostat
  • Make sure that the installation surface is smooth and clean
  • Re-verify the measurements of the area to be covered
  • Check the cable or mat’s resistance using an ohmmeter
  • Review the installation steps prior to beginning the installation
  • Read the important installation guidelines

STEP 2

  • Prepare the installation layout
  • Install the gauges and cable or unroll the mat
  • Photograph the installation

STEP 3

  • Install the floor sensor
  • Fish the cold lead to the connection box
  • Check the cable or mat’s resistance using an ohmmeter

STEP 4

  • Cover the cable or the mat

    Depending on the type of floor covering that you will be installing, you can either cover the cables with a polymer-modified mortar or with polymer-modified self-levelling underlayment.

  • Check the cable or mat’s resistance using an ohmmeter

STEP 5

  • You can now install your floor covering

    Before turning your system on it is important to respect the adhesive manufacturer's recommended adhesive curing time. Curing time may vary from 7 to 28 days. Consult the technical datasheet supplied by the manufacturer of the adhesive product you are using.

Follow-us!

Contact True Comfort Systems

Your comments, questions and suggestions is something that we are very interested to know. Let us know by completing this form. Thank you and you will hear from us soon.